Tube in Cube, designed by Volker Latussek, made by PelikanGoal of this wonderful puzzle is to pack the pieces into the box.  I found this unique design very challenging.  Puzzle comes in its original box.  A review of Tube in Cube can be found here: http://www.puzzlemad.co.uk/2023/02/something-for-everyone-from-pelikan.html-----Buyer is responsible for shipping which should be less than $10-12 for small puzzles (within USA, first-class).  Priority mail (and heavier items, such as the glass ...

Bill's Ball bearing burr is one of my all-time favorite interlocking puzzles. The normal six-piece assembly is further complicated by the addition of two stainless ball bearings which must be placed in the correct location before assembly. The bearings are then released once the puzzle is assembled, and the solver must figure out how to maneuver them in order to disassemble the puzzle. A very unique concept and a must-have for your collection!Fit and finish is excellent with this puzzle, which w...

"Very special, very difficult and one of a kind. That’s ‘PARANUT’. Just as the Brazil nut is hard, the ‘PARANUT’ is even harder. Task is simple, just dissasemble the puzzle into 5 parts and then put it together. Sounds easy, right? Trust me, it’s not. .It’s made precisely and carefully with a rough look..It’s made of upcycled old steel parts in ‘natural’ surface, puzzle can black your finger little bit, it belongs to the game..One piece made only. If you have puzzle SHOK, yo...

Corky (or Uncorker), designed by Gary FosheeProduced by Bits & Pieces (2005).Photo shows the assembled corkscrew, but the goal is to start with it disassembled (two parts) and figure out how to put it back together to make the wine opener.  Hence, I will ship it in the unsolved, disassembled state.  It's a nice looking metal puzzle, with minor wear and tarnish consistent with its age.  Main body still looks clean and shiny.  The tarnish on the corkscrew has been polished to restore most of t...

Set of "food" packing glass puzzles, all originals from Toyo Glass.  I believe most if not all are designed by Nob Yoshigahara.  The set includes Broad Beans, Plums, Peanuts, Pineapple (Pineapple Delight), Corn (A-Maize-ing), and Rice Crackers.  For me, these puzzles ranged from relatively easy to tremendously difficult.  I needed a couple hints (i.e. the correct position for a piece or two) for a few of these puzzles (corn and pineapple, especially!).Original boxes are included for all puz...

Lager Beer, designed by Nob Yoshigahara, made by Toyo GlassAuthentic Toyo Glass puzzle.  Lager Beer includes its original box and instruction sheet.  Puzzle and box look new.-----Buyer is responsible for shipping which should be less than $10-12 for small puzzles (within USA, first-class).  Priority mail (and heavier items, such as the glass puzzles) might be $3 to $6 more.  I charge only exact shipping costs.  Please contact me if you need an estimate for international shipping.  If you w...

Gear Case, designed by Frederic Boucher, produced by NothingYetDesignsGear Case is another wonderful packing puzzle from one of my favorite designers.  I was absolutey thrilled when I figured out the moves to solve this one.  I was able to solve Gear Case before Slow Motion, another Boucher puzzle that I have listed for sale.  Comes in original see-through pouch from NothingYetDesigns.-----Buyer is responsible for shipping which should be less than $10-12 for small puzzles (within USA, first...

Cerberus, designed by Girish Sharma, produced by PelikanCerberus is a wonderful interlocking puzzle designed by Girish Sharma.  The goal is to disassemble (or assemble) the 4x4x4 cube made from 4 pieces, but over 30-35 total moves are required, including 25 moves for the 1st piece!  This was a fantastic and fun puzzle.  It will be shipped assembled, but I'm happy to ship it disassembled upon request.A review of Cerberus can be found here: http://www.puzzlemad.co.uk/2023/02/something-for-ever...

Kumikisaurus, designed and made by JunoThis is a delightful 9-piece dinosaur-shaped puzzle.  I found it fairly challenging, but I'm not too competent with burrs.  Juno describes it as a level 10-13 puzzle that is "relatively easier compared to many of Juno's diabolic burr puzzles, yet still challenging to solve."  This puzzle will be shipped in its original "incorrectly assembled" state with the front legs pointing in the wrong direction.-----Buyer is responsible for shipping which should be...

This lot includes two 3D marble mazes.XMatrix's Cubus is designed by Jeremy Goode and was an IPP Design Competition entry in 2011.  The goal is to guide the ball from one side to the opposite side.  I don't often have the patience for this route-finding maze challenges, but Cubus is appropriately sized to be enjoyable for me.  A review can be found here: http://mypuzzlecollection.blogspot.com/2010/12/xmatrix-quadrus-cubus.htmlCrystal Escape Cube is produced by Tsukuda Original.  This is als...

Red all Through, made by Toyo GlassGoal of this puzzle is to stack the plates so that a completely red square is seen through the stack.  Fun little challenge, and it's nice to keep these functional pieces out for guests to uses and play.  Puzzle is in excellent condition.  Comes with original box and documents, as well as the paper inserts that the glass was originally packed with.-----Buyer is responsible for shipping which should be less than $10-12 for small puzzles (within USA, first-cla...

These unconventional burr puzzles are made from solid brass. Everything in the photos is included with the puzzles, even the Harbros!

A framed burr designed in 2007, level 9.2.4.2.2.2. See https://puzzlewillbeplayed.com/888/NestedBurr/Simple/The pieces are fragile, the joints are not reinforced and break easily.  One piece has broken and has been re-glued. Be very careful taking it apart or reassembling.  Total weight 300 g.

The easiest in Gregory Benedetti's "Stand By Cube" series.  The pieces are integrated with the stand and the goal is to take the puzzle apart (easy), or assemble it from the pieces (slightly harder).  More info at https://cubicdissection.com/products/copy-of-stand-by-cube-oneThis copy was not made by CubicDissection, I do not recognize the makers mark shown in the second photo.  It was made before the CubicDissection release.

This Seven-Piece Hexsticks is Stewart Coffin's design #159-A.  See this blog post for more info:http://www.puzzlemad.co.uk/2011/07/improved-hexsticks-159a.htmlThis puzzle is larger than other Hexsticks puzzles I own, it weighs 300 g.

Akio Kamei's Letter box - version D3 a bit harder to open than the original. 

STEWART COFFIN'S EXPANDING CUBETHIS IS HOW I STARTED MAKING PUZZLES AFTER WATCHNG THIS IN HIS BOOK MANY YEARS AGOWOOD IS SASSAFRASHAS A NYLON STRING INSIDE TO STOP IT EXPLODINGSMALLER 2 INCH VERSION

Tom is at it again, and with excellent results this time around. The Tangler is a two piece interlocking/disentanglement which has already left many experienced puzzlers out in the cold. The goal is simple; disassemble and reassemble the two pieces, using no force. The solution however is anything but straightforward

EVERYONE IS FAMILIAR WITH THE COMMON 2 PIECES TO FORM A  PYRAMID PUZZLEI MADE A VARIATION TO THIS PUZZLE, SELLING   A FEW  SPARESFORM 6 PYRAMIDSTHEN PACK INTO BOX ALL 14 PIECES AND CLOSE THE LIDYOU CAN ALSO PACK THE 4 PENTANOMES INTO BOX , WITH VOIDSSOLVABLE AND FUNPUZZLE SENT UNSOLVED. MY 1ST AND PROBABLY LAST PACKING PUZZLE I WILL MAKECOMES IN VARIOUS EXOTIC WOODSPERSPEX CASE INSTEAD OF WOODI WILL COMBINE WINNING ITEMS TO LOWER POSTAGE COSTS, NO PAYPAL FEES

WOODTURNED VERSION OF WAYNE DANIEL'S EXPLODING ICOSAHEDRONEXCEPT THAT THE PIECES ARE  FROM 10 SIMILAR PIECES, UNLIKE WAYNE'S 2 X 5 MIRROR PIECES IT SPINS SPINS  AND  EXPLODES! THIS IS ONE COOL WOODTURNED POTVARIOUS EXOTIC WOOD