Uri Three Bars is an unusual and beautiful interlocking puzzle. This will be our second batch after an earlier, very limited release in 2015. Dario has since improved the puzzle; the previous design was solvable in 10 moves while the new release has a level 14.2 solution.Precision wood puzzles can be damaged by environmental changes. Please read the Caring for Wood Puzzles guide to ensure proper fit and operation.For multiple items, combined shipping is available. Simply message me once you a...

Cube 333 No 22 Puzzle by Naoyuki Iwase (Osho). The goal is to pack the pieces in the box so they fit flush with the top. Fun puzzle that is not to difficult. Solved once in the original packaging. There is a crack in one piece as seen in the photos. The 2 photos are of the same piece. One piece has one crack. I solved it with the crack and it was not an issue. I would say a dab of wood glue and it would be fine.Buyer will pay shipping and will be calculated at the end of the auction. Shipping wi...

Two interlocking puzzles from 2011 by Osanori Yamamoto! T-One: Two identical puzzle pieces must be placed in a frame. 14 movements are necessary to free the first puzzle piece from the frame. You need a total of 22 rotations, shifts etc. to put the puzzle back together. There are 2 solutions, but only one with color aspects. Solution is enclosed.  Double Ut: Two identical puzzle pieces must be placed in a frame. A total of 21 turns, shifts, etc. are needed to put the puzzle back to...

New in box.Description:"This design from Andrew Crowell adds a twist to his usual "rotational madness". Now you must assemble the cubes inside the frame! Two sets of pieces come with one frame for economic reasons. One set of pieces are all the same wood and the other is a variety of exotic and domestic woods. An instruction sheet is included for the proper way to solve the Caged Cube. "Review:https://www.puzzlemad.co.uk/2020/02/tics-so-difficult-they-cause-facial-pain.html

Osanori Yamamoto's Identical Twins is a classic interlocking puzzle - it is an IPP Puzzler's Award winner and one of the Mechanical Puzzle Discord's Top Five Osanori puzzles.This is a limited release copy by Tom Lensch and features his logo on an internal face of one piece. 

A great design by Terry Smart.  Read Eric's comments at https://cubicdissection.com/products/copy-of-dinlas

Vortex is a unique construction with a tricky and unique solution. With two pairs of pieces and color symmetry, you'd think this one would be trivial. Trust me, it's not. MANY rotations and a level 21 solution make this a challenge.

A so good puzzle.Andreas Röver is a reference concerning coordinated motion, and here this is a very good example.Not an explosion like a lot of coordinated motion, here you must found a series of moves coordinated and not, combined to take apart the 4 pieces.Each time I played with I wasn't really able to reassemble it with my memory, but each time I solve it with a logical approach, I love this puzzle.Winner pays shipping cost plus packagingShipping price is just an estimation (include packag...

Three identical board burr pieces in a cage but not as simple as it looks.  Moves are a little tight but functional.

A 6 board burr with extras!  read Eric's comments at https://cubicdissection.com/products/sloot-3

First, the construction : This puzzle is just a little bit to loose, but globaly correct.Wenge is very nice as you can see on photo, but there is 2 angles with a little damaged (see photo)Second, the design :This puzzle is doable. The level : 11, but it is not the main part of the challenge, there is dead end and false start that increase a little bit the difficulty. External shape is not classic but not very difficult to imagine when you reassemble it. Of course, like a lot of puzzle, reassembl...

Before TICs (Turning Interlocking Cubes) were even a thing Ken Irvine made his mark designing cubic puzzles requiring devious rotations to solve.  Unlike many of this genre where things are tight and it's hard to figure out how to squeeze a piece in where it needs to go, Matador's pieces are rather open and fit together in ways that permit lots of movement.   The key steps in the 4.10 solution are hiding in plain sight, awaiting the solver's  wonderful aha moments that take you from one appar...

This is one of those beautiful cube burrs from Alfons - Kalinka has 23 pieces and level 22 solution. It's not for the feint hearted, but I hope you enjoy the ride. Sorry I can't provide more information about the woods used - as usual Alfons picks out a beautiful selection that always match well!https://www.royalmail.com/sending/international/international-tracked-signed I accept Paypal and Transferwise.

I received this burr un-assembled and had the fun/pain of putting it together before I could enjoy taking it apart. It has a very fun level 9.9.9 solution and was perfectly crafted by Cubic Dissection back in 2013 - although this may explain why the pieces are a tiny bit loose for my liking.I will send the puzzle out assembled to save you the pain of going through all 7360 solutions to try to find the right one! Lucky the re-assembly solution is on PWBP ;)http://puzzlewillbeplayed.com/12PieceBur...

Beautiful wooden puzzle designed and made by Alfons Eyckmans.

A 18 pieces burr by one of the specialist of this category : Alfons Eyckmans, and made by a specialist of this category too : Maurice vigouroux.A non classic shape and a "cool" level of diffculty.level : 17.1.16.8.5.16.2.8.1.1.1.2.2.2The disassembling process is really doable, and reassembling process is not impossible, a very good puzzle.The wood is wonderful, the puzzle making can be considered like a little bit loose but it's just very good for this kind of puzzle, permitting change humlidity...

A 18 pieces burr by one of the specialist of this category : Alfons Eyckmans, and made by a specialist of this category too : Maurice vigouroux.An atypic shape in a nice unknown wood.level : 42.4.1.11.4.7.3.2.2.5.2A lots of false start, dead end, pieces moving together, big number of moves, similar pieces ...Difficult is not the correct word, it's really more than that, I personally never succed with this puzzle.Disassembling seems to be doable, reassembling certainly not without burrtools.A col...

A tricky 6-piece assembly by Duane Einfeld.  Eric's description is at https://cubicdissection.com/products/copy-of-kaon-interlocking-puzzle-paduak-variation

A six-piece burr with seven pieces?  read Eric's description at https://cubicdissection.com/products/uranus-second-edition

Are you ready? No. You're not ready. This puzzle is a BEAST.Puzzler's Cage was designed by Junichi Yananose in 1999 without the aid of a computer. He describes it as “crazy hard”. The puzzle has more interlock than should be possible, with half of the stick ends captive in notched perpendicular pieces. Even with instructions, assembly is a daunting task.We used three different woods to give clues for solving. The beautiful tones of Bubinga, Schedua and Black Palm ensure this will hold a priz...