A unique puzzle by Yuyuki Endo - the goal is to remove the string by rotating the burr.From the original description: "At first glance, it looks like a tree, but none of the pieces can be removed. Don't try to fall apart. Moving the stopper at the base of the cube piece will allow the piece to rotate. The purpose is to find a place that works well, move it in order, and finally remove the string attached. It's a slightly strange spinning puzzle."Puzzles are kept in a pet-free room of a smok...

there is a very small dent on one of the sides. see pic.Fidget burr was an easy decision to make. A seemingly simple 3x3 cube, it's actually a five-piece interlocking burr with a level 12 solution. Three burr pieces nest inside two identical frame pieces. Disassembly of this puzzle is VERY tricky, with many false paths and dead ends.  Fidget Burr is a ton of fun and it turned out very well.Shipping Cost and Handling Fees (4.5%) Will be worked out once the Auction has ended.I can combine shippin...

This is equivalent to a 4 pc puzzle ring, but made in wood. scrambles easily, but isn't quite so easy getting it back to the solved state.

Description: Identical Twins, designed by Osanori Yamamoto, manufactured by Tom Lensch. Listed with manufacturer’s approval. Puzzlers award winner at 2017 IPP. Condition: Excellent. No alignment issues. No flaws, if so difficult to identify. Payment: Accept PayPal and Venmo.  Approximate shipping and handling cost is $12 USD domestic (US) or $30 USD international added after auction. Please do not pay until final invoice is sent. Can combine with other orders to save shipping co...

The object of this large sturdy metal puzzle is to remove the shuttle. The design is centuries old and believed to have originated in China. Copyright 1997 by Tucker-Jones Inc., Setauket, New York. Handmade in the U.S.A. Measures roughly 8 inches by 4 inches. Each of the 8 rings are approximately 2 inches in diameter. Comes with a cloth storage bag. Like new condition.

a selection of 6 Hanayama puzzles. puzzles sold as seen without any boxes.UFO.INFINITYHUZZLE PAD LOCK.CAST VORTEXCAST SYLINDERHUZZLE COIL PUZZLE. now this may have an issue with it. it feels bound up and i have never managed to free the two parts from each otehr or move them at all. i havent given it much time so this may be intentional but i suspect it may be a functional issue.Shipping Cost and Handling Fees (4.5%) Will be worked out once the Auction has ended.I will combine shipping on multip...

This large sturdy metal puzzle is shaped like a butterfly. The goal is to remove the ring. Copyright 1992 by Tucker-Jones Inc., Setauket, New York. Handmade in the U.S.A. Measures roughly 8 x 9 inches. The ring has a 3 inch diameter. Comes with a cloth storage bag. Like new condition.

Dragon Head was Saul Bobroff's exchange puzzle for IPP19 in London, 1999.The goal of the puzzle is to remove the rope from the dragon's head, and then replace the rope to the start position. The information sheet shows the start position, not the solution.

GoCube Edge full pack.  Cube, charger, stand and pouch.  I purchased this about 6 months ago.  Just like in the 80's I'm still not a cuber!!  Only been used twice.  It is complete with paperwork and in perfect condition.  Buyer to pay actual shipping and Paypal fees.

2 Puzzles from Dick Hess.Ipp 31 exchange puzzles berlin 2011.Winner pays shipping cost and a part of paypal fees (4% paypal fees conversion USD to EUR)Shipping price is just an estimation, it will be recalculate exactly.Before payement, message me at the end of the auction to calculate total exact price.For multiple items, combined shipping is available.

Puzzlers' Award (and Jury First Prize) at the IPP design competition 2010A very beautifull puzzle (around 10 cm for the clef alone)Description from Grbnev's web site :"Goal : Take apart and put togetherThis puzzle is a product of our collaboration with my puzzle friend Dmitry Pevnitsky. In all conscience I should say that main contribution was done by Dmintry. Actually you may assess it your self. I just created initial idea – puzzle Spiral, but Dmitry saw that it may be tran...

Disassemble and reassemble this symbol of infinity. Note - shipments outside of the US will result in additional shipping fees to be determined later. 

Eric’s descriptionSoma in Case is another offering from design genius Hajime Katsumoto. The seven soma pieces must be packed into a 5x3x2 space. Not too tough, except that the lid also has a cube secured to it and so the pieces must maneuver around the obstruction. Over 100,000 solutions, only one is assemblable with a combined 14 moves necessary. This is a difficult, elegant design.Construction of this puzzle is outstanding, with sturdy box joinery and fully beveled cube pieces.

Up for auction is the C'EST LA VIE puzzle supposedly designed by Jean Claude Constantin. The goal is to free the ring and put it back together afterwards.. I believe the new owner will run in circles for quite some time until the real exit is found (on one of the sides above the "C" letter the wood is chipped and I think the pre-owner thought this is the exit point. Of course it is not and has no influence onthe solving)If you will win this auction you will receive an email from me asking for yo...

Teaser Balls were designed by Anneke Treep and Christian Freeling, and crafted by John Rausch.  The puzzle is made from wooden balls & mountaineering line and measures 7 x 2 x 2.25 in assembled form.  Additional information found here: 

These are 2 puzzles (first two pics) by Rick Irby.  He recently made his return for a few weeks, promising to make other puzzles for me to further complete my extensive chrome collection, before vanishing into thin air again.  I hope he's alright!  Puzzle/picture one looks similar to another disentanglement I've seen elsewhere, except this one is made from a more elegant brass wire and metal.  Puzzle/picture two is a dexterity disentanglement puzzle with chain and chainmail.  The third pi...

Three Wire PuzzlesThree Wire Puzzles from Puzzle Master in original packaging. Chain Gang level 9, Panic Attack level 8, and The Big 30 level 6.Shipping will be calculated at auction close, so please allow time for that before sending payment. Buyer is responsible for PayPal fees. If you have any questions just send me an email. Many thanks!

This is a very fun puzzle designed by Karl Scherer for IPP20, see label in photo for details.Mahalo!Bidding constitutes acceptance of the terms specified in the Shipping tab for this item; you must review this prior to bidding.International Shipping is available - see Shipping tab for detailsLook for other HoneyBadger listings in 2020 Marketplace events featuring puzzles from the Garcia Family Collection, including top designers and makers from US, Japan, Europe, Australia and more.  

Pig & Cow Puzzle has 4 separate challenges, and was designed and produced in 2004 by Dick Hess for exchange at IPP25 in Helsinki.  Included instructions and solutions.Handmade from heavy 4mm gauge copper plated steel rod.Mahalo!Bidding constitutes acceptance of the terms specified in the Shipping tab for this item; you must review this prior to bidding.International Shipping is available - see Shipping tab for detailsLook for other HoneyBadger listings in 2020 Marketplace events featuring p...

Stick A by Nob Yoshigahara consists of a wooden stick with 3 holes, a string loop and one coin.The object is to remove the loop and coin.  Side of puzzle is embossed "Nob Puzzland Hikimi".Nob Yoshigahara designed this wonderful series of puzzles, which was faithfully produced by Puzzland Hikimi many years ago.MahaloBidding constitutes acceptance of the terms specified in the Shipping tab for this item; you must review this prior to bidding.International Shipping is available - see Shipping ta...